TROUBLESHOOTING
Before calling for service, please review the TROUBLESHOOTING chart below.
The problem may not be unit malfunctions.
Problem
[ Error indication ]
WHAT TO DO
• Plasmacluster Ions are not released.
Clean the electrode section of the unit. (See E-16)
• Is the Plasmacluster Ion Generating Unit installed correctly?
Remove the unit, fully inserted again and press the
Operation Button. (See E-16)
• Is an air suction port cover inserted properly?
Insert air suction port cover correctly, and press the
Operation Button. (See E-13,15)
• Pull out the AC adapter and insert it again in approx. 1
minute, and then operate the product again.
• If an error is displayed repeatedly, please contact the store
you purchased the product or Sharp Service Centre.
E-20