Connecting Wires to Terminals
FM modulator unit
To prevent fire when the ignition wire (Red) or battery wire
(Yellow) is short-circuited by coming into contact with the
vehicle chassis (ground), only connect the power supply after
making the fuse box connections.
Be sure to press the reset button after installation.
Changer connection wire
CD/MD auto - changer input
FM/AM antenna input
FM/AM antenna output
Ground wire (Black)
(To car chassis)
— 18 —
CD/MD auto-changer /
Sirius satellite radio tuner
O-N selection switch
with FM tuner
Car fuse box
Do not install an antenna of radio equipment or
distribute the antenna wire near the changer output
wire, for this could cause malfunction with this unit.