Thresholdrule - D-Link NetDefend DFL-210 Cli Reference Manual

3.41. ThresholdRule

3.41. ThresholdRule
Description
A Threshold Rule defines a filter for matching specific network traffic. When the filter criteria is
met, the Threshold Rule Actions are evaluated and possible actions taken.
Properties
Index
Name
SourceInterface
SourceNetwork
DestinationInterface
DestinationNetwork
Service
Schedule
Comments
3.41.1. ThresholdAction
Description
A Threshold Rule Action specifies what thresholds to measure, and what action to take if those
thresholds are reached.
Properties
Index
Action
GroupBy
The index of the object, starting at 1. (Identifier)
Specifies a symbolic name for the rule. (Optional)
Specifies the name of the receiving interface to be compared to
the received packet.
Specifies the sender span of IP addresses to be compared to the re-
ceived packet.
Specifies the the destination interface to be compared to the re-
ceived packet.
Specifies the span of IP addresses to be compared to the destina-
tion IP of the received packet.
Specifies a service that will be used as a filter parameter when
matching traffic with this rule.
By adding a schedule to a rule, the security gateway will only al-
low that rule to trigger at those designated times. (Optional)
Text describing the current object. (Optional)
Note
If no Index is specified when creating an instance of this type, the object will be
placed last in the list and the Index will be equal to the length of the list.
The index of the object, starting at 1. (Identifier)
Protect or Audit. (Default: Protect)
Specifies whether the threshold should be host- or network-
based. (Default: SourceIP)
139
Chapter 3. Configuration Reference