Switching Seek Mode; Select Sirius Satellite Radio Mode; Channel/Category Search - Kenwood eXcelon KDC-X769 Instruction Manual

Select Sirius Satellite Radio Mode

Selecting the Sirius Satellite Radio Tuner (optional accessory)
connected to this unit.
Selecting Sirius Mode
Press the [SRC] button.
Select the "SIRIUS" display.
• You need to subscribe to SIRIUS to receive the service by Sirius
Satellite Radio. Consult SIRIUS if "CALL 888-539 SIRIUS TO
SUBSCRIBE" appears.
• It may take a little time to start receiving after you selected the
SIRIUS source.
• If the signal receiving fails, "Acquiring Signal" appears.

Switching Seek Mode

Sets the seeking mode.
Press the [AUTO] button.
Each time the button is pressed the Seek mode switches as
shown below.
Display Operation
"Channel" Normal manual seeking control.
"Preset" Search in order of the channels in the Preset
memory.

Channel/Category Search

Selecting the channel and category you want to receive.
1
Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "CH+"/ "CH–"/ "CS+"/ "CS–" is
displayed above the [2] — [5] button.
2
Select the item for adjustment
Press the desired [2] — [5] button.
Each time the button is pressed the items that can be adjusted
switch as shown below.
Adjustment Item
Search down in category
Search up in category
Search down for channel
in selected category
Search up for channel
in selected category
You cannot operate this unit until all the Category information is
acquired.
— 29 —
Button Display
[2] "CS–"
[3] "CS+"
[4] "CH–"
[5] "CH+"