Speaker Setting; Display Mode Switching; Text Display Switching - Kenwood eXcelon KDC-X769 Instruction Manual

General features

Speaker Setting

Fine-tuning so that the System Q value is optimal when setting
the speaker type.
1
Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2
Enter Speaker Setting mode
Press the [Q] button.
3
Select the Speaker type
Press the [2] — [5] button.
Each time the button is pressed the setting switches as shown
below.
Speaker type
OFF
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
4
Exit Speaker Setting mode
Press the [Q] button.

Display Mode Switching

Switching the display mode.
1
Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "DISP" is displayed above the
[3] button.
Refer to <Notes on Multi-function Key System> (page 8).
Button Display
[2] "SP OFF"
[3] "SP 5/4inch"
[4] "SP 6*9/6inch"
[5] "SP O.E.M."
— 14 —
2
Enter display control mode
Press the [3] ("DISP") button.
3
Select the display mode
Press the [2] ("MODE") button.
Each time the button is pressed the display mode switches as
shown below.
Display Display Mode
"Display C" Demonstration.
"Display A" Normal display type
"Display B" Silent display type.
4
Exit display control mode
Press the [RTN] button.

Text Display Switching

Switching the text display.
1
Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "DISP" is displayed above the
[3] button.
Refer to <Notes on Multi-function Key System> (page 8).
2
Enter display control mode
Press the [3] ("DISP") button.
3
Select the text
Press the [3] ("TEXT") button.
It can also be switched by pressing either [4] or [¢] button.