Securing the TV to the Wall
(depending on the model)
Screw 1(M4X 16)
Screw 2 (M8X19)
To prevent the TV from falling
1. Unscrew a screw attached on the back of your TV, then connect the Holder-TV [lor 2] with the screw through the hole.
Make sure to only use the supplied screws.
When you install the wall-mount, refer to the "Securing the TV to the wall" in the TV manual for installation type.
. - - - - - - - - - [CD
Type] - - - - - - - - ,
2. Firmly fasten the screws to the wall or cabinet where the TV is to be installed. Tie the TV-Holder attached to the TV and the screws
fastened on the wall or cabinet so that the TV is fixed.
Purchase the screws to be used on the wall or cabinet separately.
Install the TV close to the wall so that it does not fall.
When attaching the TV to the wall, tie the cord level with the ground or slanted downwards for safety purposes.
Confi rm that the cord or link does not come loose frequently.
Before moving the TV, separate the connected cord first.
Use the Wood screw (sold separately) from the size M4x20.
3. Verify all connections are properly secured. Periodically check connections for any sign of fatigue or failure. If you have any doubt
about the security of your connections, contact a professional installer.