Additional Information; Troubleshooting - Sony BRAVIA KDL-50W670A Operating Instructions Manual

Additional Information

Troubleshooting

When the illumination LED is flashing in red, count how many times it flashes (interval
time is three seconds).
Press "/1 on the TV to turn it off, disconnect the AC power cord (mains lead), and inform your dealer or
Sony service centre of how the indicator flashes (number of flashes).
When the illumination LED is not flashing, check the items in the tables as follows.
Also refer to "Troubleshooting" in the i-Manual. If the problem persists, have your TV serviced by
qualified service personnel.
Condition
There is no picture (screen
is dark) and no sound.
Some programmes cannot
be tuned.
The remote control does not
function.
The "Parental Lock"
password has been
forgotten.
The TV surrounds become
warm.
Frozen audio or video, a
blank screen, or the TV
does not respond to TV or
remote control buttons.
22
GB
Explanation/Solution
• Check the antenna (aerial)/cable connection.
• Connect the TV to the AC power (mains), and press "/1 on
the TV or remote control.
• Check the antenna (aerial).
• Replace the batteries.
• Your TV may be in SYNC mode.
Press SYNC MENU, select "TV Control" and then select
"Home (Menu)" or "Options" to control the TV.
• Enter 9999 for the PIN code. (PIN code 9999 is always
accepted.)
• When the TV is used for an extended period, the TV surrounds
become warm.
You may feel hot when touching there by the hand.
• Perform a simple reset of the TV by unplugging the AC power
cord (mains lead) for two minutes, then plug it in again.