Direct Access Tuning; Switching Display - Kenwood KCA-R71FM Instruction Manual

Sirius satellite radio tuner features
Direct Access Tuning (Function of remote)
Entering the channel and tuning.
1
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote.
2
Enter the channel number
Press the number buttons.
3
Do Channel Search
Press the [4] or [¢] button.
Canceling Direct Access Tuning
Press the [DIRECT] button on the remote.
• If you make no button operation for 10 seconds, the Direct Access
Tuning mode is automatically canceled.
• You can set up to Channel number 223.
• If there is no signal in the input Channel, "NO CHANNEL" appears.
• If you cannot receive any signal in the input Channel due to a bad
condition on radio wave or another problem, "ACQUIRING SIGNAL"
appears.

Switching Display

You can display various kinds of text data transmitted from
broadcasting stations by switching as follows.
Press the [DISP] button.
Each time the button is pressed the display switches as shown
below.
Information
Channel Number
Channel Name
Song Title
Artist Name
Category Name
Album Title
— 8 — — 8 —
Display
"CHANNEL"
"SONG"
"ARTIST"
"CATEGORY"
"ALBUM"