Panasonic FP-7742 Service Manual page 127

Location
2
Screw
Sheet by-pass tray
Adjusting plate screw storage
Adjusting plate
Paper size
plate
5-8
Shipping material/Procedure
Side to side adjustment
1. Sheet bypass tray
(1) L o o s e n a d j u s t i n g s c r e w s .
(2 screws)
(2) Move the adjusting plate to the
front or rear accordingly.
Note: After this adjustment is
done, duplex side to side
adjustment must be done.
(Adjustment #3 below)
2. 550 sheet paper drawer
(1) Pull the paper drawer out until it
stops.
(2) Loosen the paper drawer adjusting
plate (2 screws), and move it to the
front or rear as required.
(3) Install new paper then adjust the
paper width.
(4) Remove the paper.
(5) Retighten the paper drawer
adjusting plate mounting screws.
(6) Loosen paper size plate mounting
screw and move the plate as
necessary, then tighten the screw.
Check