Front-Panel Controls And Features; Remote Control Functions - Kenwood H2EC Operating Instructions And Installation Manual

Kenwood car audio/video operating instructions h2ec
Table of Contents

Advertisement

KEN.4064 H2EReceiver/Car Man
11/19/04
9:44 AM
• Temporarily plug the cigarette lighter adapter
into the cigarette lighter.
• Slide Here
Everywhere all the way into the
2
cradle so that the connector at the bottom
of the unit makes proper contact in the cradle.
10
Press the power ( ) button to turn
Here
Everywhere on.
2
Note: KENWOOD RECOMMENDS UNPLUGGING THE
CIGARETTE LIGHTER ADAPTER AFTER YOU TURN OFF
THE VEHICLE'S IGNITION. (In some vehicles, the
cigarette lighter remains active after the ignition
has been turned off, and leaving Here
Everywhere's
2
cigarette lighter adapter plugged into the cigarette
lighter could drain the vehicle's battery.)
• If your Here
Everywhere has been properly
2
connected and the antenna is receiving the
SIRIUS signal (Preview Channel #184), you
will hear audio. If you do not hear audio,
the display will read "Acquiring Signal. "
Front-panel Controls
and Features
Power ( ) Button: Turns Here
Everywhere off and on.
2
Memo Button: Saves and recalls song and artist
information; enters S-Seek List Mode (see pg. 18
for more on S-Seek).
Page 10
Memo
Display
Menu
Band
Power
Jump
Display
Cat.<
Cat.>
Presets
Control Knob
Display Button: Switches the display between different
modes with artist and song title information displayed
in various sizes; also used to enter Channel List Mode.
Menu Button: Enters and exits Setup Mode.
Band Button: Cycles through the 5 banks of
presets; enters and exits the Preset Tune Mode.
Jump Button: "Jumps" over to a special stored
channel, such as a local traffic channel; then can
be used to "jump" back to the previous channel.
Cat. (<, >) Buttons: Enters Category List Mode
and moves from category to category.
Preset Number Buttons, 1-6: Sets and selects
preset channels.
Control Knob: Turn to change channels or move
around in menus.
• Press to make selections in menus and lists.
• Press and Hold for about 2 seconds to go back
to a previous channel.
Remote Control
Functions
Power ( ) Key: Turns Here
Everywhere off and on.
2
Select Key: Used to select items in a list after
navigating the list with CH Up and Down Keys.
CAT (<, >) Keys: Enters Category List Mode and
moves from category to category.
CH Up and Down Keys: Moves up and down one
channel (in Channel Seek Mode), or one preset
(in Preset Seek Mode).
Mute Key: Turns off the audio of Here
Everywhere.
2
Display Key: Switches the display between different
modes with artist and song title information displayed
in various sizes.
Jump Key: "Jumps" over to a special stored channel,
such as a local traffic channel; then can be used
to "jump" back to the previous channel.
Number Keys: Numbers 1-6 select preset channels
in the currently selected band. Numbers 0-9 are
used with the Direct button to tune directly to a
specific channel number.
Direct Key: Enters Direct Tuning Mode.
Preset Key: When followed by Number Key 1-6,
stores the current channel as preset 1-6 in the
current bank.
Band Key: Cycles through the 5 banks of presets.
List Key: Enters and cycles between several list
modes: Channel, Artist, and Song Title.
P. Tune Key: Switches back and forth between
Preset Tune Mode and Channel Tune Mode.
Back Key: Return to the most recently tuned
channel (previous channel).
Memo Key: Saves song and artist information.
Power
Ch
Cat.<
Select
Ch
Cat.>
Mute
Jump
Number Keys
Display
Direct
Preset
Band
P. Tune
Back
Memo
List
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Here2everywhere system-h2ecSirius system-h2ec

Table of Contents