Miscsettings; Multicastsettings - D-Link NetDefend DFL-210 Cli Reference Manual

3.51.14. MiscSettings

LogSendPerSecLimit
3.51.14. MiscSettings
Description
Miscellaneous Settings
Properties
UDPSrcPort0
Port0
AVSW_Engine

3.51.15. MulticastSettings

Description
Advanced Multicast Settings.
Properties
AutoAddMulticastCoreRoute
IGMPBeforeRules
IGMPMaxGlobalRequestsPer-
Second
IGMPMaxRequestsPerSecond
IGMPReactToOwnQueries
IGMPRobustnessVariable
Limits how many log packets the security gateway may send out per
second. (Default: 2000)
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
How to treat UDP packets with source port 0. (Default: DropLog)
How to treat TCP/UDP packets with destination port 0 and TCP packets with
source port 0. (Default: DropLog)
Antivirus Software Engine Selection. (Default: Auto)
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
Auto generate core route for "224.0.0.1-239.255.255.255".
(Default: Yes)
Allows IGMP traffic to enter the Security Gateway by de-
fault. (Default: Yes)
Maximum number of requests per second. (Default: 1000)
Maximum number of requests per interface per second.
(Default: 100)
The Security Gateway should always respond with Member
Reports, even to Queries originating from itself. (Default: No)
IGMP is robust to 'value' - 1 packet losses. (Default: 2)
175
Chapter 3. Configuration Reference