Name Plate; Reference Matters; Collet Chuck; Precautions In Disassembly And Reassembly - Hitachi M 8V2 Technical Data And Service Manual

Router

Hide thumbs Also See for M 8V2:

Table of Contents

7-2. Name Plate

Each tool is provided with a Name Plate which lists the following basic safety precautions in the use of the tool.

(1) For the U.S.A. and Canada

(2) For Australia, New Zealand and South Africa

The collet chuck portion consists of a collet chuck and a collet nut. The collet chuck and the nut are assembled as

a single unit to maintain desired dimensional accuracy. Therefore, when replacing the collet chuck portion, be

sure to replace it entirely.

The [Bold] numbers in the descriptions below correspond to the item numbers in the Parts Lists and exploded

assembly diagram for the Model M 8V2. The ([Bold]) numbers in the descriptions below correspond to the item

numbers in the Parts Lists and exploded assembly diagram for the Model M 8SA2. The disassembly and

reassembly procedures described are the same for the Models M 8V2 and M 8SA2.

CAUTION: Prior to commencing disassembly, inspection or other maintenance, ensure without fail that

the plug is disconnected from the power source.

--- 5 ---

Table of Contents

M 8sa2