Stainless steel blade: place the blade
directly in the main bowl, over the motor
shaft.
Put the lid on, and lock into position.
To slice: place the disc with its slicing
blade facing upwards.
Discs: place the selected disc on
the suppor t, turning it gently in an
anti-clockwise direction.
Please be careful when handling the blades and disc as they are
!
extremely sharp.
FITTING THE ACCESSORIES
Blender
ix: for use with the main
blade. For small quantities place it in the
bowl otherwise position it in the lid.
To grate: Place the disc with its grating
blades facing upwards.
Lower the support, fitted with a disc, onto
the motor shaft in the centre of the bowl.
Put the lid on and lock into position.
7