Rack Fitting - Haier HDY-M40 Owner's Manual

DRYING RACK FITTING INSTRUCTION
DRYER FREE STANDING-UPRIGHT
For ease of access, the rack is to be mounted near the dryer top. Firstly hold the rack
horizontally with the two end projections pointing upwards and away from yourself.
Position the rack near the top of the dryer
and place the end of the right rack projection
into the right cabinet mounting hole (Fig.1).
Then gently pull on the left rack projection until
it fits around the cabinet and springs into the
left cabinet mounting hole.
The rack will now lie horizontally, supported
by the cabinet. Rotate the door outlet grills
that the air exausts upwards and through the
rack.
RACK STORAGE - DRYER UPRIGHT
When the drying rack is not needed, simply pivot the rack upwards untill it lies flat on the top
of your dryer.
WALL MOUNTED - DRYER INVERTED
In this situation, the rack is to be mounted near the dryer door part way along the cabinet.
Firstly hold the rack horizontally with the
two end projections pointing upwards and
away from yourself.
Position the rack in front of the dryer and
place the end of the right rack projection
into the right cabinet mounting hole ( Fig.2).
Then gently pull on the left rack projection
until it fits around the cabinet and springs
into the left cabinet mounting hole.
The rack will now lie horizontally, supported
by the cabinet.
Rotate the door outlet grill so that the air exhaust blows upwards and through the rack.
12