Unpacking Your Dryer - Haier HDY-M40 Owner's Manual

UNPACKING YOUR DRYER

Dimensions
a(mm) b(mm)
HDY-M60
830
HDY-M40 830
Remove the transport packaging (fig.1) and remove the dryer rack
from the top packaging (fig.2). Remove the tape on the front (fig.3
and fig.4), the wall mounting kit attached to the drum with tape on
the inside and the panel film, before starting the dryer.
fig.1
Packing accessories
Check list of the accessories and materials provided with the machine:
Owner 's manual Wall mounting kit Panel film Screw
Quantity
(HDY-M60)
Quantity
(HDY-M40)
To ensure the dryer operates normally, attention must be paid to the
following:
1. The rear of the dryer must not have any restriction to the intake of
fresh air.
2.Check the dryer for any damage. If any damage is found do not operate
and contact your supplier or Authorised Service Centre.
3.The dryer must be kept away from flammable substances.
4.The surrounding environment must be dry and ventilated.
5. For best results, the ambient temperature should be between 10 C
and 35 C.
c(mm)
560
600
445
600
fig.2
1
1 None
weight(kg)
30
28
fig.3
1
8
fig.4
Dryer rack
1 6
1 None
1
None