Download Print this page

Kenmore 4900 series Owner's Manual And Installation Instructions page 28

Front-loading automatic washer
Hide thumbs

Advertisement

I
I
[]
Did you use enough HE detergent?
Follow manufacturer's
recommendations
for the type of
load you are washing.
For best performance,
use only High
Efficiency
detergent.
Use enough detergent
to remove soil
and hold (t (n suspension.
[]
Do you have hard water?
Use more detergent
for washing heavy soils in cold or hard
water.
[]
is your water colder than 60°F (15.6°C)?
Wash water colder than 60°F (15.6°C) may not completely
dissolve the detergent.
Use hot or warm washes if safe for
the fabric load. Make sure your hot water system (s adequate
to provide a hot water wash.
[]
Are you using a low speed wash cycle?
Powdered
detergents
may not dissolve well (n a slow-speed
cycle. For best results, use liquid detergent for slow-speed
cycles such as Dellcates.
[]
Did you unload the washer promptly?.
To avoid dye transfer, unload the washer as soon as (t stops.
[]
Did you use a fabric
softener
dispensing
ball?
Dispensing
balls will not operate correctly
with this washer.
Add liquid fabric softener to the fabric softener compartment,
[]
Did you use powdered
detergent
in a low-speed
cycle?
Consider
using liquid detergent.
[]
Did you use Express Wash on a large load?
For best results, use Express Wash for small, lightly soiled
loads.
Load is wrinkled,
twisted,
tangled
[]
Did you unload the washer promptly?.
Unload the washer as soon as it stops.
[]
Did you use the right cycle for the load being washed?
Use the Delicates cycle or another cycle with a low spin
speed to reduce wrinkling.
[]
Did you overload the washer?
The wash load must be balanced
and not overloaded.
Loads
should tumble freely during washing.
[]
Was the wash water warm enough to relax wrinkles?
If safe for load, use warm or hot wash water.
[]
Are the hot and cold water hoses reversed?
Check to be sure the hot and cold water hoses are
connected
to the right faucets. A hot rinse followed
by spin
will cause wrinkling.
See "Connect
the Inlet Hoses" in the
Installation Instructions.
28
(Best 2)Kmmlore 592-49003-02902A-01
EN.i_ldd 28
2011-03-23
L,_,_ft 9:40:00
I

Hide quick links:

Advertisement

loading