Features And Benefits - Kenmore 110.24975 Use & Care Manual

8. Ifthewasher isnotlevel, move thewasher outslightly, tip
back, p rop upthefront o fthewasher withthewood block
andadjust thefeetupordown asnecessary. Repeat steps
5through 8 until w asher islevel.
9. After t hewasher isinthefinal l ocation a ndlevel, usea%e in.
(14mm) o pen-end wrench t oturn thenuts onthefeettightly
against thewasher cabinet.
Ifthenuts arenottight a gainst thewasher cabinet, the
washer may vibrate.
1. Check t heelectrical requirements. Besure that y ouhave the
correct electrical supply and therecommended grounding
method. (See "Electrical Requirements.")
2. Check t obesure allparts arenow installed. Ifthere isan
extra part, g oback through t hesteps toseewhich step was
skipped.
3. Check to be sure you have all of your tools.
4. Check to be sure that the yellow shipping strap was removed
from the back of the washer and used to secure the drain
hose.
5. Dispose/recycle all packaging materials.
6. Check to be sure the water faucets are on.
7. Check for leaks around faucets and inlet hoses.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
8. Plug into a grounded 3 prong outlet.
9. Remove the protective film on the console and any tape
remaining on the washer.
10. Read "Washer Use" in the Washer User Instructions.
11. To test your washer, measure 1/2 of the normal
recommended amount of powdered or liquid detergent and
pour it into the washer basket or detergent dispenser (on
some models). Close the lid. Select any cycle, and then press
START. Allow it to complete one whole cycle.
BENEFITS
Your new washer has many special features that contribute to
proper cleaning and fabric care. Here are descriptions of the
features and their benefits:
TOTAL CARE
TM
Agitator
The TOTAL CARE
TM
Agitator moves in three directions to ensure
proper cleaning. At the bottom of your washer the agitator vanes
move back and forth to flex the fabric, loosening the soil. The
upper portion of the agitator has vanes that push the clothes
down in a spiraling pattern to the area of best cleaning action. A
"rollover" motion displaces the clothes already at the bottom. For
your largest loads, the TOTAL CARE
TM
Agitator responds with a
vertical motion that senses the "large load" and guides items to
the bottom.
KING SIZE
TM
Capacity
Your washer can handle full-sized loads of heavy work clothes,
towels, or mixed items (see "Loading"). Loads with only a few
items can have a lower water level setting and they need less
wash time.
Ultra Rinse System
You can adjust your wash cycle with a five-position rinse Options
control. First, set the Cycle Selector Control (Timer) knob where
you want the cycle to start. Then, set the rinse Options control
knob where you want the cycle to stop. In addition, you can add
an automatic second rinse to the Ultra Clean cycle and to the
Permanent Press II cycle.
QUIET PAK
TM
III System
The QUIET PAK
TM
Ill System is designed to reduce water sounds
and ringing noises. The cabinet is insulated with sound-damping
materials. A sound-absorbing blanket under the motor and
gearcase also helps to insulate the washer to reduce vibration
noise.
TRIPLE SMART
TM
Dispensers
The Triple Smart
TM
dispenser ensures that detergent, bleach, and
fabric softener are introduced into the washer at the proper time
and are properly diluted. The dispenser makes your washer truly
automatic by making it unnecessary for you to return to the
washer during the cycle to put in detergent, bleach, or fabric
softener.
Wash/Spin Speeds
Six combinations of speeds are provided for wash action (of
agitator) and spin motion (of basket). A Speeds selector control
knob lets you select a wash/spin speed for different types of
fabrics and soil levels.
Water Level and Temperature
A Water Level control gives you the flexibility to save water when
washing small loads. Another control knob lets you select a wash
and rinse water temperature setting based on the type of load
you are washing. The settings for Automatic Temperature Control
(ATC) take away the worry of undissolved detergent and ensure
consistent cleaning results from season to season with warm and
cold washes.
10