2-26 PERIODIC MAINTENANCE
Periodic Maintenance Procedures
Clean the adhered silicone sealant.
Install the new muffler baffle assembly [A] into the inner
While suppressing the muffler baffle for shrink, install the
muffler body [C].
When replacing the muffler baffle assembly, insert the
inner pipe [A] into the hole [B] of the muffler body end.
When the muffler pipe mounting bolt holes are not suit-
able, remove the muffler from the chassis, and then as-
semble the muffler body and inner pipe.
Apply a non-permanent locking agent to the muffler pipe
mounting bolts [A], and tighten them.
Install the muffler, if removed (see Muffler Installation in
the Engine Top End chapter).
Apply silicone sealant to the circumference [A] of the inner