Refer to the Frame Inspection in the Periodic Mainte-
Rear Frame Removal
Seat (see Seat Removal)
Right and Left Side Cover (see Side Cover Removal)
Muffler (see Muffler Removal in the Engine Top End
Rear Fender (see Rear Fender Removal)
Inlet Air Temperature Sensor Connector [A]
Loosen the air cleaner duct clamp screw [A].
Unscrew the rear frame mounting bolts [B].
Remove the rear frame [C] with the air cleaner housing
Air Cleaner Housing [B]
Rear Frame Installation
Install the air cleaner housing to the rear frame (see Air
Cleaner Housing Installation in the Fuel System (DFI)
Torque - Rear Frame Mounting Bolts: 34 N·m (3.5 kgf·m, 25
Install the removed parts (see appropriate chapters).