Drain the engine oil (see Engine Oil Change in the Peri-
odic Maintenance chapter).
Remove the clutch cover (see Clutch Cover Removal).
Clutch Spring Bolts [A]
Clutch Spring Plate [B]
Needle Bearing [B]
Push Rod Holder [C]
Friction Plates [D]
Steel Plates [E]
The two plates at both ends are different from the plate
installed between these plates. However, it is impossi-
ble to identify it on externals.
Mark and record the locations of the both side friction
plates so that they can be reinstalled in their original
Hold the clutch hub [A] with the clutch holder [B].
Special Tool - Clutch Holder: 57001-1243
Remove the clutch hub nut [C].
Clutch Hub [B]