Cylinder Head Cover
Cylinder Head Cover Removal
Fuel Tank (see Fuel Tank Removal in the Fuel System
Spark Plug Cap [A]
Cylinder Head Cover Bolts [B]
Cylinder Head Cover [C]
Cylinder Head Cover Installation
Apply silicon sealant [A] to the cylinder head as shown.
Sealant - Liquid Gasket, TB1211F: 92104-0004
Replace the head cover gasket [A] with a new one.
Install the head cover gasket on the cylinder head.
Replace the spark plug hole gasket [B] with a new one,
and install it.
Make sure that the upper chain guide [A] is bottomed.
Unless the upper chain guide is bottomed, the
camshaft chain could push the cylinder head cover
upward, leading to an oil leak.
Install the head cover from the motorcycle left side.
Install the head cover bolt washers with the metal side [A]
Torque - Cylinder Head Cover Bolts [B]: 9.8 N·m (1.0 kgf·m,
ENGINE TOP END 5-11