The HEPAexhaustfilter mustbe replaced
when dirty. It shouldbe replacedregularly
dependingon use conditions.
The fitter CANNOT be washed as it will
lose its dust trapping ability.
Note: See PARTS AND FEATURES
for the exhaust filter number.
Remove exhaust filter cover by pressing
the release tab on the cover and rotating
out from vacuum.
Remove the filter cartridge from cover.
Place new filter cartridge into cover making
sure that airflow arrow on side of cartridge
points into cover.
The foam seal of the filter should be
placed against the vacuum cleaner body.
Replace the exhaust filter cover by placing
bottom tabs in slots and rotating in until
cover snaps into place.