Extend the wand to its full length. Turn the
locking ring to the LOOK position. Attach the
extension wand onto the open end of the
Align the tabs on the extension
the "J" slots in the hose. Push the wand into
the hose and twist to the right to lock.
To achieve maximum
reach with the attach-
ments, add the crevice tool to the end of the
wand by inserting
and twisting slightly.
Attach combination brush directly to the wand.
See ATTACHMENT USE TABLE for combi-
nation brush usage.
TO OPERATE SUCTION
When using attachments for cleaning
draperies, small rugs with low pile and other
delicate items, twist the suction control slide
to the open position. This slide is located on
the telescopic wand, close to the hose.
This will reduce suction for ease of cleaning.
slide to the closed
position for normal
When using attachments, be careful not
to overextend the stretch hose when
reaching.Trying to reach beyond the
hose stret""'_h capabilitycould cause the
vacuum cleaner to tip over.
TO STORE ATTACHMENTS
Remove the combination brush. Snap into
appropriate storage location.
Remove crevice tool from the wand by twist-
ing. Lay aside.
Remove the telescopic
wand from the hose.
Twist the wand to the left and pull from the
Unlock the wand by turning the wand locking
ring to the UNLOCK position.
Slide the lower wand into the upper wand.
Turn the wand locking ring to the LOCK posi-
Place the crevice tool down into the com-
pressed wand. Place the telescopic
the wand holder
DO NOT pull the vacuum cleaner
around the room by the hose. Property
damage or personal injury could result.