EXTENSION HOSE ASSEMBLY
t. Connect extension hose to the wand
holder by twisting and pushing down
over the wand holder to assure a good
2. Connect the extension
hose by align-
ing the =J" slot with raised tabs. Push
downward and rotate clockwise to lock
For use of extension wand and hose see
Remove the Handi-Mate
Jr. ® from the
plastic bag and insert Handi-Mate
into the vacuum cleaner as shown, then
close the Handi-Mate
Jr. ® storage cover.
1. Turn the quick
release upper cord
hook to either side
and down to
release the power
2. Release the power cord plug from the
power cord and pull the cord off the quick
release upper cord hook. Be sure the power
cord is still locked into the locking notch on
the upper cord hook.
3. Plug the polarized power cord into a 120
Volt outlet located near the floor.
4. To replace cord, turn upper hook counter-
clockwise pointing up, then wrap cord.
To reduce the risk of electric shock,
this vacuum cleaner has a polarized
plug, (one blade is wider than the
This plug will fit in a polarized
let only one way. If the plug does
not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a
Do not change
plug in any way.
Personal Injury and Product Damage
• DO NOT plug in if switch is in the
ON position. Personal injury or dam-
age could result.
• DO NOT use outlets above coun-
ters. Damage from cord to items in
surrounding area could occur.