Advertisement
Available languages
Available languages
WARNING
Fire and/or Electrical Shock Hazard
Do not operate with a clogged
exhaust filter or without the exhaust
filter or exhaust filter cover installed.
EXHAUST
FILTER
HEPA
The exhaust filter cartridge
must be
replaced when dirty.
Replace the filter when
the entire surface area is covered evenly.
The filter CANNOT be washed as it will
lose its dust trapping
ability.
NOTE: See PARTS AND FEATURES for
exhaust filter number.
1. Pull Up on
&ha.st
_
I
the exhaust ill-
Filter
Am f)
/I
ter cover to
Cover_ _._.tr,"
/
remove from
_
the motor cover
and lay aside.
Exhaust
2. Slightly push
the exhaust filter
cartridge to the
side, as shown in
the illustration,
and pull up to
remove.
3. Replace the
exhaust filter car-
tridge, carefully
Exhaust
positioning
it SO
Filter..
that the side
shown in the
illustration goes
down under the
ribs. Then push
the other side
down until it snaps into place. Place the new
filter into the motor cover with the grey
edge down.
Exhaust
Filter
4. Replace the
exhaust filter
cover by engag-
ing the two tabs
on the rear and
pushing down in
front until it
snaps closed.
Always follow all safety precautions when
cleaning and servicing the Power-Mate ®.
IWARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect
electrical supply before
servicing
or cleaning the unit,
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly
starting.
16
Advertisement
