Specifications - Makita BHR240 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Capacities
No load speed (min
Blows per minute
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode : chiseling function
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model
Concrete
Steel
Wood
-1
)
Overall length
Net weight
Rated voltage
equipment and
environmentally compatible
) : 88 dB(A)
pA
) : 99 dB(A)
WA
value (tri-axial vector
2
) : 11.5 m/s
h,CHeq
2
END004-3
Work mode : hammer drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
its
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
ENE043-1
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
ENG102-3
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
We Makita
manufacturer declare that the following Makita
ENG215-2
machine(s):
Designation of Machine:
sum)
Cordless Rotary Hammer
Model No./ Type: BHR240
are of series production and
2
BHR240
18 mm
13 mm
26 mm
0 - 1,100
0 - 4,000
410 mm
3.2 kg
D.C. 18 V
) : 14.0 m/s
h,HD
2
) : 3.0 m/s
h,D
2
Corporation as the
ENG303-2
2
ENG301-1
2
ENG901-1
ENH101-13
responsible