Advertisement
Available languages
Available languages
_
IPlease pay special attentionto these hazard alert boxes, and follow any instructions]
Igiven. WARNING statements alert you to such dangers as fire, electricshock, burnsI
I_d
personal injury. CAUTION statements alert you to such dangerous personall
Ilnjuryand/or property damage.
/
Electrical Shock Hazard
Do not plug into the electrical sup-
ply until the assembly is complete.
Failure to do so could result in elec-
trical shock or injury.
Before assembling the vacuum cleaner,
check the PACKING LIST on the cover of
the separate REPAIR PARTS LIST. Use
this list to verify that you have received all
the components of your new Kenmore vacu-
um cleaner.
Attach stretch
hose end to
nozzle until
hose end
locks into
place.
Hose
End
HANDLE ASSEMBLY
Remove the screw located just below the
top edge of the back of the vacuum cleaner.
Screw
Position the handle as shown in the illustra-
tion above right.
Slide the handle into the opening at the top
of the vacuum cleaner.
H_no_lldlWee_Handle
Insert the screw so it passes through the
handle into the vacuum cleaner.
Begin to tighten
the screw with
your fingers. It
may be neces-
sary to adjust
the handle
slightly.
Using a screwdriver, tighten the screw.
l
CAUTION
Do not overtighten.
Overtightening
could strip the screw
holes.
Do not operate the vacuum cleaner
without the screw In place.
Advertisement
