How Your Vacuum Cleaner Works; Canister Care; Bag Changing - Kenmore 116.27514 Owner's Manual

Thevacuumcleanercreatessuctionthat _-,_
picksupdirt°Rapidlymovingair carriesthe
[[ u.-_
dirt to the dust bag through the airflow pas- ////"- -'q
sages. The dust bag lets the air pass ///'
through, while it traps the dirt ./_'/_/
For best cleaning results, keep the air- /_.,_" 1
flow passage open Check the starred ..,_.*J 1, Motor
areas occasionally for clogs Unplug/_
U
Safety
\ Filter Exhaust
from outlet before che _ Filter
For best cleaning results, the dL_st bag
should be changed often. The electronic
performance indicator wiEI come on when
the bag needs to be changed or the airflow
is blocked.
NOTE: See PARTS AND FEATURES for
Bag Number
1, Unplug cord from
wall outlet.
3, Pull hood release
out and up, then lift
canister hood.
4. Disengage
cardboard tab from
red bag mount by
pulling away and
lifting up
5. Pull bag out of the
red bag mount.
Red Bag
Mount
6. Check the
motor safety
filter and
replace, if
necessary.
7. The red bag mount will flip forward after
removing bag. This win prevent the hood
from closing until a new bag is installed.
Note: DO NOT bend or crease the middle
of the cardboard when installing the bag
into the bag mount slots.
& Rotate red bag
mount down and
install bag into slots
per illustration,
pushing down until
the cardboard tab
locks into position
and the holes align.
Tuck the bag
securely into the bag cavity so that none of it
is able to be pinched by the hood,
9. Close and latch canister hood,
10. Reinstall hose.
11, Plug cord into wall outlet
CAUTION
t4
NEVER REUSE A DUST BAG. Very fine
materials, such as carpet freshener,
face powder, fine dust, plaster, soot,
new carpet lint, etc. can clog the bag
and cause it to burst before it is full and
may cause damage to vacuum cleaner
motor. Change bag more often when
vacuuming these materials.