Change the charging behavior of the device. If the USB port of
your computer does not supply enough power capacity (500
mA), charging may not be successful. Set the USB charge option
to Slow [100 mA] or Off and use an (optional) power supply.
• Fast [500 mA] (default)
• Slow [100 mA]
When set to On, the device can be used as audio output device
for the computer when it is connected via the USB cable.
The recorder can be used for hands-free recording and tran-
scription by connecting the optional Philips foot switch LFH2210
to the optional docking station ACC8120. In this operating
mode, you can control the recording and playback functions with
the foot switch. Hands-free recording and transcription, p.
Save a diagnosis file for error analysis and a file with all device
configuration settings on the memory card.
Reset your settings to the factory default values.
Turn on the noise reduction function for better playback quality.
Noise reduction reduce the background noise and improves the
intelligibility of quieter voices.