Table of Contents
Advertisement
chapter 2
Installation for Windows
Introduction
The installation of your hp wireless PC card WL110 for
Windows consists of the following steps:
1. Insert the CD-ROM to install the Client Manager
software (see page 2-2).
2. Insert your hp wireless PC card WL110 (see page 2-3).
3. Install drivers (see page 2-4).
4. Set the wireless LAN properties (see page 2-8).
5. Finish installation (see page 2-14).
Note: If you intend to use the hp wireless PC card WL110
in the WL510 Access Point, please refer to the
documentation that was shipped with the device.
Installation for Windows 2-1
Advertisement
Table of Contents
