Connecting to the Wi-Fi network
After the initial setup, walk the homeowner
through connecting to a Wi-Fi network. Or,
refer the homeowner to the User's Guide, so
the homeowner can connect the thermostat to
a Wi-Fi network at a later time.
1 Connect the Wi-Fi network.
to connect the thermostat to the
Wi-Fi network. The screen displays the
message "Searching for wireless networks.
Please wait..." after which it displays a list of
all Wi-Fi networks it can find.
If you cannot complete this step now,
I'll do it later
the home screen. Complete this process by
2 Select the network.
2a Touch the name of the homeowner's
network. The thermostat displays a
If the home network is not shown on the
2b Using the keyboard, touch the characters
that spell out the home network
2c Touch Done. The thermostat displays
"Connecting to your network. Please
wait..." then shows a "Connection
2e Have the homeowner register the
thermostat by going to
Note the Thermostat MAC and CRC;
they'll be needed during registration. Or,
refer the homeowner to the User's Guide.
The Register Online screen remains
active until you complete registration and/or
3 For remote access, the homeowner or end-
user must register at
. The thermostat will display
. Continue with
to display the registration
Press for info