Table of Contents
Advertisement
^ Fill the water tank to the mark with
lukewarm water.
^ Add two descaling tablets to the
water.
Please note the mixing ratio for the
descaling tablets. It is important that
you fill the water container with
enough water. Too little water can
cause the descaling program to be
stopped prematurely.
^ Reinsert the water tank and close the
unit door.
^ Follow the instructions on the display.
When the display shows "Rinse water
container and fill with fresh tap water up
to the descaling symbol F ", proceed
as follows:
^ Rinse the water tank carefully with
clean water. Make sure that no
descaling agent is left in the water
tank. Fill clean tap water up to the
mark F.
Also empty the waste unit.
The descaling process is complete
when the display reads, "Program
finished".
^ Tap the OK button.
The descaling program is now
complete and beverages can be
prepared in the machine again.
When descaling the machine, be
sure to wipe off any splashes of
descaling agent immediately! These
could damage the surfaces.
After descaling the machine, carefully
clean the water tank and the drip tray to
remove all traces of descaling agent.
How to descale before
prompted
^ Tap x .
^ Tap the arrow key Y until
"Maintenance" is highlighted.
Tap the OK button.
^ Tap the arrow keys until "Descale the
system" is highlighted.
The descaling program cannot be
canceled once it has started. The
program has to be carried through to
the end.
^ Tap the OK button.
The descaling process will start.
Descaling
59
Advertisement
Table of Contents
