Display Settings - Cisco Telepresence System EX60 User Manual

Cisco Telepresence System EX60
Contents Introduction

Display Settings

The Display settings let you adjust:
Preferred brightness by moving the Brightness slider.
The color balance. There are four preset color settings
(Cold, Neutral, Warm and your own (Custom)) available.
When you select Custom, you may use the Red, Green
and Blue sliders to specify your own setting.
The DVI mode can be set to automatically detect the type
of video signal received, or forced to analog or digital.
The DVI mode is used when the unit is connected to a
PC to serve as a PC monitor.
D14779.04 User guide EX60, TC4.2, July 2011
All contents are Copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Connecting EX60 Using EX60
27
The settings The settings Web interface
User guide
Contact us
www.cisco.com