Do Not Disturb - Cisco Telepresence System EX60 User Manual

Hide thumbs Also See for Telepresence System EX60:
Table of Contents

Advertisement

Cisco Telepresence System EX60
Contents
Introduction

Do not disturb

When set to Do Not Disturb (DND), ringtones are muted
and missed calls you get while having DND active, will be
presented when you exit DND..
You may, however, place calls as much as you like. To
activate this feature, press the icon in the upper left corner.
Press again to deactivate.
You may also hide the Do Not Disturb poster by tapping
Hide.
Using Touch Tones (DTMF)
Sometimes you may be urged to enter touch tones (DTMF)
during a call, typically to reach extensions or to provide a
pin code.
In a call,
tap Touch Tones.
Use the
touch tone keypad.
Tap anywhere outside
it to exit.
D14779.04
User guide EX60, TC4.2, July 2011
All contents are Copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Connecting EX60
Using EX60
Using EX60
Far end camera control
If the other end point permits
it, you may control their
camera. This is known as Far
end camera control.
If the other camera cannot
be controlled, nothing
happens.
19
The settings
Web interface
Tap the name, whose camera shall be
controlled, along the bottom line
then tap
Camera Control (
Adjust zoom and pan as required
(
). Tap Back to exit the menu
(
).
User guide
Contact us
(
)
and
).
www.cisco.com

Advertisement

Table of Contents
loading

Table of Contents