Installing The Batteries - ViewSonic Pro8500 User Manual

Installing the Batteries

5. Open the battery cover in the
direction shown.
6. Install batteries as indicated by the
diagram inside the compartment.
7. Close the battery cover into
position.
Caution
„ Risk of explosion if battery is replaced by an incorrect type.
„ Dispose of used batteries according to the instructions.
„ Make sure the plus and minus terminals are correctly aligned when loading a battery.
„
Keep the batteries out of the reach of children. There is a danger of death by
accidentally swallowing the batteries.
„
Remove batteries from remote control when not using for extended periods.
„
Do not dispose of the used batteries along with household waste. Dispose of used
batteries according to local regulations.
„
Danger of explosion may happen if batteries are incorrectly replaced. Replce all
the batteries with new ones.
„
Batteries should not be in or near to fire or water, keep batteries in a dark, cool
and dry place.
„
If suspect battery leakage, wipe out the leakage and then replace new batteries.
If the leakage adheres to your body or clothes, rinse well with water immediately.
ViewSonic Pro8500 15