Download  Print this page

Daikin RXYQ5PY1 Service Manual Page 333

R-410a heat pump 50hz/60hz cooling only 50hz.
Hide thumbs

Advertisement

Operation Manual
Note
• The heating capacity drops as the outside temperature
falls. If this happens, use another heating device together
with the unit. (When using the appliances which produce
open fire together, ventilate a room constantly.)
Do not place appliances which produce open fire in places
exposed to the air flow from the unit or under the unit.
• It takes some time for the room to warm up from the time
the unit is started since the unit uses a hot-air circulatory
system to warm the entire room.
• If the hot air rises to the ceiling, leaving the area above the
floor cold, we recommend using the circulator (the indoor
fan for circulating air). Contact your dealer for details.
2-6-2 Program Dry Operation
• The function of this operation is to decrease the humidity in
your room with a minimum temperature decrease.
• The micro computer automatically determines temperature
and fan speed.
• The system does not go into operation if the room temper-
ature is low.
• The microcomputer automatically controls the temperature
and fan speed, so these cannot be set using the remote
control.
• This function is not available if the room temperature is
20°C or lower.
FOR SYSTEMS WITHOUT COOL/HEAT SELECTOR (Refer to
figure 5)
figure 5
Press the operation mode selector button several times and
1
select "
" ( program dry operation).
Press the on/off button.
2
The operation lamp lights up and the system starts operation.
Press the air flow direction adjust button (only for FXC, FXF,
3
FXH, FXK, FXA). Refer to the chapter "Adjusting the Air Flow
Direction" for details.
Press the on/off button once again.
4
The operation lamp goes off and the system stops operation.
Note
• Do not turn off the power immediately after the unit stops.
• The system need at least 5 minutes for residual operation
of drain pump device.
Turning off the power immediately will cause water leak or
trouble.
FOR SYSTEMS WITH COOL/HEAT SELECTOR (Refer to figure 8)
figure 8.1
326
figure 8
Select cooling operation mode with the Cool/Heat selector.
1
Press the operation mode selector button several times and
2
select program dry "
Press the on/off button.
3
The operation lamp lights up and the system starts operation.
Press the air flow direction adjust button (only for FXC, FXF,
4
FXH, FXK, FXA). Refer to the chapter "Adjusting the Air Flow
Direction" for details.
Press the on/off button once again.
5
The operation lamp goes off and the system stops operation.
Note
• Do not turn off the power immediately after the unit stops.
• The system need at least 5 minutes for residual operation
of drain pump device.
Turning off the power immediately will cause water leak or
trouble.
2-6-3 Adjusting the Air Flow Direction
(Refer to figure 6) (only for FXC, FXF, FXH, FXK, FXA)
Press the air flow direction button to select the air
1
direction.
The air flow flap display swings as shown right
and the air flow direction continuously varies.
(Automatic swing setting)
Press the air flow direction adjust button to select
2
the air direction of your choice.
The air flow flap display stops swinging and the
air flow direction is fixed. (Fixed air flow direction
setting)
SiEN34-705
".
figure 6
Operation Manual

Advertisement

   Related Manuals for Daikin RXYQ5PY1

Comments to this Manuals

Symbols: 0
Latest comments:
  • GMacD Dec 22, 2015 11:58:
    Your website is crap in providing useful informatio​n on your products.