Download Print this page

Daikin RXYQ5PY1 Service Manual Page 251

Daikin r-410a heat pump 50hz/60hz cooling only 50hz.
Hide thumbs

Advertisement

SiEN34-705
1.7.6 Procedure for Wiring Inside Units
! Referring to figure 27, secure and wire the power and transmission wiring using the included
Caution:
! The transmission wiring must be at least 50 mm away from the power wiring.
! Make sure all wiring do not contact to the pipes (hatching parts in the figure 27).
! After wiring work is completed, check to make sure there are no loose connections among
Installation Manual
clamp (1), (2), and (3).
Retain with accessory
clamp (3).
Electric conduit
When routing out the
power/ground wires
from the left side.
When routing out the transmission
wiring from the opening for piping.
Retain with
accessory
clamp (3).
Secure to the back
side of the support
beam using the
accessory clamp (1).
Electric conduit
When routing out the
power/ground wires from
the left side.
When wiring, exercise sufficient
caution not to detach the acoustic
insulators from the compressor.
When routing out
the transmission
wiring from the
opening for piping.
the electrical parts in the EL.COMPO.BOX.
Heat Pump / Cooling Only 50Hz (RX(Y)Q5~54P)
[In case of 5~10HP type]
Power
wiring
When routing out the power/
ground wires from the front.
[In case of 12~18HP type]
When routing out
Retain to the
the power/ground
back of the
wires from the front.
column
support with
the accessory
clamp (2).
figure 27
Transmission wiring
When routing out the
Ground
power/ground wires from
wire
the right side.
Retain to the back of
the column support
with the accessory
clamp (2).
When routing out the
Clear over
transmission wiring from
50 mm.
the knockout hole.
Transmission wiring
Power
wiring
When routing out the
Ground
power/ground wires
wire
from the right side.
Retain to the back of
the column support
with the accessory
clamp (2).
When routing out the
Clear over
transmission wiring from
50 mm.
the knockout hole.
245

Advertisement

   Related Manuals for Daikin RXYQ5PY1

Comments to this Manuals

Symbols: 0
Latest comments:
  • GMacD Dec 22, 2015 11:58:
    Your website is crap in providing useful informatio​n on your products.