Front Panel Facilities - Pioneer VP-1000 Operating Instructions Manual

CONNECTIONS
2~-------+~------~
®
Fig .8. Front panel facilities
2. Video monitor TV
If you are using a video monitor TV (equipped with a video
input terminal), use the accessory coaxial cable to connect
VIDE O O UT terminal on VP-l000 to video input terminal
on the monitor TV (terminated video input terminal).
In this case, audio outputs on VP-1000 must be connected
to audio inputs of the monitor TV or to a stereo system for
audio reproduction.
FRONT PANEL FA CI LITIES
3. Wired remote control
To use the optional remote control unit (RU-1000) for
wired remote control, connect the R U-1000 accessory cord
from the remote control unit's WIRED REMOTE CON ­
TROL jack to the REMOTE CONTROL jack on VP-1000.
For more information please follow instruction on the
optional remote control unit RU-l000.
CD
SPINDLE
Place the laser disc over thi s spindle. The spindle is coupled
directly to the motor which rotates the disc at desired re ­
volution.
®
DI SC CLA MP
When you close the lid, the magnet ic clamp holds the disc
on the spindle automatically to ensure stable rotation.
®
OBJECTIVE LE NS
Th is is the key part of the player that "read s" the signals
record ed on the laser disc. Note that the lens surface must
be k ept clean in order to maintain optimum performance.
Always avoid exposing the lens to dust and dirt. The player
is sh ipped from the factory with a protective cap over the
lens.
@
RE MOT E CONTROL INDICATOR
This lights up momentarily when you press the mode keys
on the player's top panel as fig. 8 or on the remote control
unit. When the remote control is operated w ith infrared
wireless, this acts as the receiver as well as indicator for
commands sent from the remote control unit.
7