Toshiba MMU-AP0091H Installation Manual page 76

In case of fixing indoor unit to floor
<Indoor unit viewed from overhead>
A
B
Model MML-
AP0071BH to AP0121BH
AP0151BH to AP0241BH
Attach and fix the electric parts box to the wall under condition that electric parts box to be attached to the side
*
face is removed. Remove the electric parts box as follows.
<How to remove the electric parts box>
1. Remove two mounting screws at upper side of the electric parts box.
2. Slide the electric parts box to the arrow mark, and remove it from the set.
Installation of remote controller (Sold separately)
For installation of the wired remote controller, follow to the Installation Manual attached to the remote controller.
• Pull out the remote controller cord together with the refrigerant pipe or drain pipe. Be sure to pass the remote
controller cord through upper side of the refrigerant pipe and drain pipe.
Electric parts box
mounting screws
(2 pcs)
Electric parts box
(Front side)
A B
580 610
880 910
In case of fixing indoor unit to wall
<Indoor unit viewed from front side>
Model MML-
AP0071BH to AP0121BH
AP0151BH to AP0241BH
Electric
parts box
Side plate
76
(Floor)
A
Hole is provided
B
to rear side.
A B
580 610
880 910
Side plate
fixing screw