Toshiba MMU-AP0091H Installation Manual page 69

6-9. High Wall Type
Installation space
Reserve space required to install the indoor unit and
for service work.
Keep 300mm or more for clearance between top
plate of the indoor unit and the ceiling surface.
The transport brackets are provided. Following to the table, remove the brackets according to direction of pipe.
(Left, right, center) (For AP0071H to AP0181H, only (left) and (right) transport brackets are provided.)
Pipe side piping
Right side piping
Remove transport bracket (right) only.
Rear side piping
Left side piping Remove all transport brackets.
REQUIREMENT
After removing of the transport brackets, do not
apply force on the lower cabinet. It is to prevent
deformation and breakage.
Pipe connecting position
<Front view>
Top end of installation plate
Drain pipe
<Bottom view>
Shipping from factory (Left side piping)
Parts to be removed
(Including installation plate)
Liquid side
Gas
side
60
Left and
right side piping
110
(Knockout hole)
Gas pipe 440
Liquid pipe 540
Drain pipe 560
300 or more
• Remove the installation plate.
Transport bracket
(Right)
210
77 Installation plate (Accessory)
Refrigerant pipe connecting port
liquid side B
Refrigerant pipe connecting port
gas side A
380
450
480
Model MMK-
AP0071H to AP0121H
AP0151H, AP0181H
AP0241H
69
300 or more
Installation plate
Transport bracket
(Left)
Transport bracket
(Center)
Drain pipe
connecting port
A B
Ø9.5 Ø6.4
Ø12.7 Ø6.4
Ø15.9 Ø9.5