RCA RLDED3258A-B User Manual page 31

Problems Solutions
SWITCHING A Different channels and inputs will sometimes have this effect because the
CHANNEL OR channel signal's own volume is already loud. There is no way remove this
SOURCE completely. The TV has an AUTO VOLUME LEVEL function that can
CHANGES THE combat this type of effect. Please make sure that function is turned on.
VOLUME
THERE IS When your TV's resolution is higher than the digital channel's broadcast
NOISE OR resolution, the signal is up-converted to match your TV's resolution.
TRASH PIXELS Up-converting can cause this type of effect.
ON THE
SCREEN
TIPS FOR HIGH The TV is an ideal platform for viewing High Definition Content. The
DEFINITION best image quality can be achieved by HDMI, YPbPr (Component), then
USERS VGA. However, due to variances in broadcast practices, it is possible
some image distortions can occur.
TIPS FOR Letterboxed (Widescreen) versions of DVD movies are most commonly
LETTERBOX formatted for standard 4:3 TVs. The TV has the capability of expanding
CONTENT this content so the entire screen is filled at the expense of the image
USERS proportion. To use this function press the aspect button on the remote
control and cycle among the available options.
The buttons are represented by the ▲▼◄► buttons located on the remote
I CANNOT FIND
control. ▲▼ changes the channels and ◄► changes the volume.
THE VOLUME
AND CHANNEL
CHANGING
BUTTONS
TV TURNS OFF The TV features a power saving mode which will automatically turn off the
AUTOMATICAL TV, if there's no signal provided for more than 5 minutes.
LY AFTER 5
MINUTES
MY TV Check to see if you are under POWER SAVING mode for your picture
PICTURE IS mode. Keep pressing the PICTURE button on the remote control to cycle
VERY DIM out of POWER SAVING.
30