01COV.book Page 29 Tuesday, July 30, 2002 3:46 PM
Connecting a Camcorder
KP-46WT500
KP-51WS500,
KP-57WS500, and KP-65WS500
Model name1[KP-46WT500] Model name2[KP-51WS500] Model name3[KP-57WS500] Model name4[KP-65WS500]
For easy connection of the camcorder, the projection TV has front Audio and
Video inputs (shown below). However, if you prefer, you can also connect
the camcorder to the projection TV's rear Audio and Video IN jacks.
Using AUDIO and S VIDEO cables, connect the camcorder's Audio and S
VIDEO OUT jacks to the projection TV's AUDIO and S VIDEO IN jacks.
✍
If you have a mono camcorder, connect its left audio output to the
projection TV's AUDIO L (MONO) jack.
✍
If your camcorder is not equipped with S VIDEO, use a VIDEO cable
(yellow) instead of the S VIDEO cable.
YC-15V/30V (not supplied)
VMC-810S/820S
VIDEO
(not supplied)
(yellow)
S VIDEO
S VIDEO
VIDEO (yellow)
VMC-810S/820S
(not supplied)
AUDIO-L (white)
AUDIO-R (red)
Installing and Connecting the Projection TV
AUDIO-L (white)
A/V output
AUDIO-R (red)
YC-15V/30V (not supplied)
A/V output
29
[4-088-847-12]