Sony KP-46WT500 Operating Instructions Manual page 15

01COV.book Page 15 Tuesday, July 30, 2002 3:46 PM
Model name1[KP-46WT500] Model name2[KP-51WS500] Model name3[KP-57WS500] Model name4[KP-65WS500]
Connection Description
1 DVI-HDTV
Can accommodate a copy-protected digital connection
VIDEO (HDCP
AUDIO R/L
have compatible interfaces. The DVI-HDTV input terminal is
(VIDEO 7 IN) compliant with the EIA-861 standard, and is not intended for
use with personal computers. See the instruction manual that
came with your equipment for details about connecting and
using it with the TV.
2 AUX
Allows you to view local and cable channels if your cable
provider does not feature local channels. You can switch
between local and cable channels easily by pressing ANT
on the remote control. Devices connected to the AUX
input cannot be viewed in Twin View.
3 TO CONVERTER This is a VHF/UHF OUT jack that lets you set up your
projection TV to switch between scrambled channels
(through a cable box) and normal cable channels (CATV).
Use this jack instead of a splitter to get better picture
quality when switching between scrambled and
unscrambled cable channels.
4 VHF/UHF Connects to your VHF/UHF antenna or cable.
5 S VIDEO Connects to the S VIDEO OUT jack of your VCR or other S
(Rear and front) VIDEO-equipped video component. Provides better picture
quality than the VHF/UHF jacks or the Video IN jack.
6 VIDEO
Connects to the audio and video OUT jacks on your VCR
(L/R)/AUDIO or other video component. A fourth video input (VIDEO 2)
(Rear and front) is located on the front panel of the projection TV.
7 Y/P /P Connects to your DVD player's or Digital Set-top box's
B R
(L/R)/AUDIO
component video (Y, P
8 TV OUT Outputs the signal that the TV is tuned to (regardless of
the picture displayed on the screen).
9 AUDIO OUT Connects to the left and right audio inputs of your audio or
(VAR/FIX) video component.
L (MONO)/R
0 CONTROL S
To control other Sony equipment with the projection TV's
IN/OUT remote control, connect the CONTROL S IN jack of the
equipment to the CONTROL S OUT jack on the
projection TV with the CONTROL S cable.
To control the projection TV with a remote control for
another Sony product, connect the CONTROL S OUT
jack of the equipment to the CONTROL S IN jack on the
projection TV with the CONTROL S cable.
* High-bandwidth Digital Content Protection.
Installing and Connecting the Projection TV
*
) to other devices (such as digital set-top boxes) that
, P ) and audio (L/R) jacks.
B R
15
[4-088-847-12]