Disassembly Instructions - Mitsubishi Electric MXZ-A18WV Service Manual

13

DISASSEMBLY INSTRUCTIONS

13-1. MXZ-A18WV -
OUTDOOR UNIT
OPERATING PROCEDURE
1. Removing the cabinet.
1. Removing the cabinet.
(1) Remove the screws of the top panel.
(2) Remove the top panel.
(3) Remove the screw of the service panel.
(4) Remove the service panel.
(5) Remove the screws of the front panel.
Photo 3
2. Removing the inverter assembly
(1) Remove the top panel, service panel and front panel.
(2) Remove indoor/outdoor connecting wire and power supply
cable.
(3) Remove the compressor connector on the compressor side.
(4) Remove the connectors for fan motor, LEV, thermistor and
R.V. coil from the electronic control P.C. board.
(5) Remove the screws of the inverter assembly.
(6) Remove the inverter assembly.
E1
Screws of the top panel
Screws of the front panel
Photo 1
Photo 2
Screws of the front panel
Screws of the
front panel
Photo 4
Screw of the relay panel
71
PHOTOS
Screws of the top panel
Screws of the
front panel
LEV, R.V.coil
and thermistor
connectors
Compressor
Fan motor
connector
connector
Screw
of the
service
panel