Water Fill Hole Cover
Temperature Selector/Smart Steam™ Dial
Surge of Steam Button
Push I/0 (ON/OFF) Button and Auto-Off Light
10. Cord Wrap/Stable Heel Rest
11. Fabric Guide
12. Water Window with FULL Mark
13. 2-Way Steam Clean
14. MAGNAGLIDE INOX
and MAGNAGLIDE INOX
This appliance has a polarized plug (one blade is wider than the other). As a safety
feature, this plug will fit into a polarized outlet only one way. If the plug does not fit
fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electri-
cian. Do not attempt to defeat this safety feature.
This appliance is equipped with a tamper-resistant screw to prevent removal of the
outer cover. To reduce the risk of fire or electric shock, do not attempt to remove the
outer cover. There are no user serviceable parts inside. Repair should be done only
by authorized service personnel.
How To Use
NOTE: Before first use, remove any labels, stickers, or tags which may be attached
to the body or soleplate of the iron.
1. Move the Lever to Smart Steam. Flip open the
Water Fill Hole cover. Tilt the iron slightly for-
ward and use a measuring cup to pour water
into the hole until the level reaches the FULL
mark on the Water Window (A). Do not overfill.
NOTE: Be sure to aim the spout of the cup into
the slot of the Water Fill Hole. Close the cover.
Refill as needed.
2. Use ordinary tap water for ironing. Do not use
water processed through a home softening system.
3. In extremely hard water areas, use tap water the first time you use the iron. Then
are trademarks of General Magnaplate Corp. and used under license.