Kenmore 122.16118 Use And Care Manual page 10

Installing Side Burner
1.Attach side burner to grill cart by using (4)
1/4x3/5" Phillips head screws with (4) ¼" lock
washers. Then use (1) 5/32" Phillips head screw
and (1) 5/32" lock washer to attach side burner
control panel to main control panel. (Fig.10)
2..Attach gas line to side burner. Then, remove the
nut from the orifices at the end of the gas line (Fig
10a). Insert the orifices thru the bracket for side
burner. (Fig 10b) Secure the orifices using the nut
removed during step 1.
3. Plug ignition wire into electrode under the side
burner. (Fig 10c)
Installing Side Shelf
1. Attach side shelf by using (4) 1/4x3/5" Phillips
head screw with (4) ¼" lock washers. Then use (1)
5/32" Phillips head screw and (1) 5/32" lock
washer to attach the side shelf control panel to
main control panel. (Fig 11).
5/32x2/5"
1/4x3/5"
Installing Grease Tray
1. Insert grease tray assembly into opening on
backside of grill. Make sure to slide tray onto
tracks as illustrated and that the grease cup is on
the right hand side from the back. Using (2) 5/32
x 2/5" Phillips head screw and (2) 5/32" nuts with
(2) 5/32" lock washer attach the tank heat shield.
(Fig 12)
When you have finished assembling grill,
make sure that all screws and nuts are tight
and secure.
Figure 11
Figure 10c
1/4x3/5"
5/32x2/5"
Figure 10
Figure 10b
Figure 10a
Figure 12
10