Updating The Unit's Firmware Via The Network - Yamaha R-N301 Owner's Manual

Updating the unit's firmware via the network

New firmware that provides additional features or product improvements will be released as needed. When new
firmware is available, "New Firm" is displayed for a while when the unit is turned on. Follow the steps below to update
the firmware.
New Firm
Please Update!
Note
Do not operate the unit or disconnect the power cable or network cable during firmware update. Firmware update takes about 20
minutes or more (depending on your Internet connection speed).
POP-UP MENU
Cursor keys
B / C
ENTER
SETUP
SETUP
1
Press SETUP.
2
Use the cursor keys to select "Network
Setup" and press ENTER.
3
Use the cursor keys to select "Information"
and press ENTER.
If new firmware is available, "NewFwAvailable"
appears on the front display.
Firmware
¡NewFwAvailable
4
Press RETURN to return the previous state.
5
Use the cursor keys to select "Update" and
press ENTER.
Network
¡Perform¡Update
6
To start the firmware update, press ENTER.
The unit to restart and the firmware update starts.
y
To cancel the operation without updating the firmware, press
SETUP.
40
En
HOME NOW PLAYING
ENTER
RETURN
MUTE
VOLUME
SP A
SP A
7
If "UPDATE SUCCESS" appears on the front
display, press A (power) on the front panel.
The firmware update is complete.