Cycles - Kenmore ULTRA WASH 15831 Use And Care Manual

Cycles
f
Ultra Wash Sensor • QuietGuard System
Q I I
SENSING WASHING WATER HEATING
I ('l'1"l'l'l
POTS NORMA WATER CHINA QUICK
PANS WASH MISER WASH RINSE
SENSINGCYCLES
R
(_QA_N CONTROI_LLOCK
"" 1
J
CYCLE
POTS &PANS
•
POTS
PANS
Soil Level
Detected By
Ultra Wash
Sensor Wash
A "#'" shows what each cycle includes.
Water
Final Cycle Usage
Main Heated Timetr (gallons/
Rinse Wash Rinse Rinse Dry Imin.) liters)
Heavy ,/ ,/t ,/t ,/ ,/t ,/ 96. 10.8/40.9
Light
,/t ,/t ,/ ,/t ,/ 80 tt 8.6/32.6
For cleaning dishes, and pots and pans with cooked-on or baked-on foods.
Detergent
Dispenser
Sections
D
D
Use Both
Sections
NORMAL WASH
r
NORMAL i
WASH i
Heavy / ,/ ,/t ,/ ,/t ,/ 90 tt 10.8/40.9
Medium ,/ ,/t ,/ ,/t ,/ 86 tt 8.6/32.6
Light ,/ ,/ ,/t ,/ 70 tt 6.5/24.6
D
D
Use Both
Sections
For everyday heavily soiled dishes. (The Energy Guide label is based on this cycle.)
"Select the Water Heat option to heat water to 135°F (57°C) in the main wash.
WATER MISER
I ATER
MISER
Heavy ,/ ,/t ,/t ,/ 70tt
Light ,/ ,/t ,/ 60_
6.5/24.6
4.3/16.3
D
D
Use
Covered
Section
For prerinsed and lightly soiled dishes. Saves energy by using less hot water than Normal Wash cycle.
• Select the Water Heat option to heat water to 135°F (57°C) in the main wash.
t Water automatically heats to 135°F (57°C).
tt Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher. The cooler the water, the
longer the cycle time. It the water is already hot enough, the cycle times will be as shown.
The electronic time display pauses while water is being heated and Water Heating status indicator glows while water is being heated to the
temperature shown.
NOTE: You can add a dirty dish if the Washing status indicator is on. Opening the door will not affect the sensor.
13