Network Interface Module LEDs
(10%, 50%, 80%)
The flashing behavior is an on/off cycle once every 1.6 seconds, approximately.
Wireless Edge Module LEDs
There are no network connectivity ports on the J9051A or J9052A. The module enables
the Switch to operate with ProCurve Radio Ports as a centrally-administered Wireless
The normal state; indicates that there are no fault conditions on the module.
Also lights all associated downlink port LEDs on the modules.
Also lights all associated uplink network Port LEDs on the modules.
These LEDs operate in conjunction with the Mode Select button on the switch chassis
to show port activity, duplex mode, and link speed.
These LEDs come on according to the amount of activity or load the module is