Using the Waterproof Housing
1. Opening The Latch
Per arrow in the graphic below, pull
latch "A" outward and the clasp "B"
will slacken and allow you to pull lock
mechanism away from the rear cover.
3. Close the Cover
Per graphic to the right, First close
the clasp "B" and then press inwards
the latch "A" to lock tight
2. Insert Camera
Open hinged rear cover and insert camera
as shown in the graphic below.
Two button operation only when camera is
Inside the waterproof housing
Note! The waterproof housing is certified at a
maximum depth of 30 Meters (99 feet). Should an
area of condensation form on the inside the
waterproof housing this will not cause a
problem for the cameras safe function. .